Tin dioxide nanomaterial-based photocatalysts for nitrogen oxide oxidation: a review

• Viet Van Pham,
• Hong-Huy Tran,
• Thao Kim Truong and
• Thi Minh Cao

Beilstein J. Nanotechnol. 2022, 13, 96–113, doi:10.3762/bjnano.13.7

• organic semiconductors such as graphitic carbon nitride (g-C3N4) [71]. When acting as an auxiliary photocatalyst, SnO2 promotes the photocatalytic activity of the primary material [38][70][75][76]. Wu et al. reported the visible-light-driven elimination of NO over hydrothermally synthesized BiOBr/SnO2 p–n

• TiO2 and BiOBr, recent works reported the successful combination of SnO2 nanomaterials with conjugated polymers such as graphitic carbon nitride (g-C3N4) and polyaniline (PANI), yielding metal-free visible-light-driven photocatalysts for addressing NO gas pollution. Such combinations hold great

Nanoporous and nonporous conjugated donor–acceptor polymer semiconductors for photocatalytic hydrogen production

• Zhao-Qi Sheng,
• Yu-Qin Xing,
• Yan Chen,
• Guang Zhang,
• Shi-Yong Liu and
• Long Chen

Beilstein J. Nanotechnol. 2021, 12, 607–623, doi:10.3762/bjnano.12.50

• photocatalyst (i.e., poly(p-phenylene)) for PHP was reported, but did not attract much attention due to the low hydrogen evolution rate (HER) [11]. In 2009, Wang et al. reported a novel metal-free polymeric photocatalyst (i.e., graphitic carbon nitride (g-C3N4)), which could efficiently reduce protons to

Microwave-induced electric discharges on metal particles for the synthesis of inorganic nanomaterials under solvent-free conditions

• Vijay Tripathi,
• Harit Kumar,
• Anubhav Agarwal and
• Leela S. Panchakarla

Beilstein J. Nanotechnol. 2020, 11, 1019–1025, doi:10.3762/bjnano.11.86

• copper. Graphitic carbon nitride (g-C3N4) or graphite powder (commercially available) are used as carbon source. g-C3N4 is synthesized and characterized according to [18]. X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) confirms the formation of g-C3N4 (Figure S1 in Supporting

• with either graphite or graphitic carbon nitride (g-C3N4) yields carbon-coated or nitrogen-doped carbon-coated metallic nanoparticles. When these reactions are conducted in a Teflon reactor, the products are further functionalized with fluorine. Figure 3a shows XRD patterns of Cu and Ni nanoparticles

• 10 mL of 0.5 M nitric acid and sonicated for 10 min. The resultant powder is washed with water several times until pH 7 and dried it in an oven at 50 °C for 2 h before being used in further microwave experiments. Synthesis of graphitic carbon nitride (g-C3N4) g-C3N4 is synthesized and characterized

Synthesis of novel C-doped g-C₃N₄ nanosheets coupled with CdIn₂S₄ for enhanced photocatalytic hydrogen evolution

• Jingshuai Chen,
• Chang-Jie Mao,
• Helin Niu and
• Ji-Ming Song

Beilstein J. Nanotechnol. 2019, 10, 912–921, doi:10.3762/bjnano.10.92

• technology based on semiconductor materials is a promising strategy for advancing the utilization of solar energy to the level of viable industrial production, such as organic synthesis [1][2], environmental governance [3][4], as well as fuel production [5][6]. Graphitic carbon nitride (g-C3N4), as a novel

Reduced graphene oxide supported C₃N₄ nanoflakes and quantum dots as metal-free catalysts for visible light assisted CO₂ reduction

• Md Rakibuddin and
• Haekyoung Kim

Beilstein J. Nanotechnol. 2019, 10, 448–458, doi:10.3762/bjnano.10.44

• heating at 130–190 °C for 5−20 h. It is observed that hydrothermal exposure of acid-treated graphitic carbon nitride (g-C3N4) nanosheets at low temperature generated larger NFs, whereas QDs are formed at higher temperatures. The formation of GCN hybrid materials was confirmed by powder X-ray diffraction

• conduction band (CB) and valence band (VB) edge positions, exhibit efficient charge separation, have a large surface area, and it must be cost effective. Considering the above factors, nontoxic metal-free catalysts, such as graphitic carbon nitride (g-C3N4) and reduced graphene oxide (rGO) have received wide

Oriented zinc oxide nanorods: A novel saturable absorber for lasers in the near-infrared

• Pavel Loiko,
• Tanujjal Bora,
• Josep Maria Serres,
• Haohai Yu,
• Magdalena Aguiló,
• Francesc Díaz,
• Uwe Griebner,
• Valentin Petrov,
• Xavier Mateos and
• Joydeep Dutta

Beilstein J. Nanotechnol. 2018, 9, 2730–2740, doi:10.3762/bjnano.9.255

• , e.g., MoS2, WS2 [16][17], black phosphorus (BP) [18]), and topological insulators (TIs, e.g., Bi2Te3, Sb2Te3 [19][20], graphitic carbon nitride (g-C3N4) [21]). In the PQS regime, such structures enable the generation of nanosecond pulses at high repetition rates (up to MHz) and they are attractive for

Improving the catalytic activity for hydrogen evolution of monolayered SnSe_2(1−x)S_2x by mechanical strain

• Sha Dong and
• Zhiguo Wang

Beilstein J. Nanotechnol. 2018, 9, 1820–1827, doi:10.3762/bjnano.9.173

• strengthen the hydrogen binding on graphitic carbon nitride (g-C3N4), whereas compressive strain had the opposite effect. Yan et al. [49] showed that large elastic strains influence the catalytic activity of WC for HER. Very recently, 2D SnSe2(1−x)S2x alloys have been synthesized experimentally [35]. To our

Perovskite-structured CaTiO₃ coupled with g-C₃N₄ as a heterojunction photocatalyst for organic pollutant degradation

• Ashish Kumar,
• Christian Schuerings,
• Suneel Kumar,
• Ajay Kumar and
• Venkata Krishnan

Beilstein J. Nanotechnol. 2018, 9, 671–685, doi:10.3762/bjnano.9.62

• Ashish Kumar Christian Schuerings Suneel Kumar Ajay Kumar Venkata Krishnan School of Basic Sciences and Advanced Materials Research Center, Indian Institute of Technology Mandi, Kamand, Mandi 175005, Himachal Pradesh, India 10.3762/bjnano.9.62 Abstract A novel graphitic carbon nitride (g-C3N4

• degradation of pollutants has been proposed and discussed. Keywords: CaTiO3; graphitic carbon nitride (g-C3N4); heterojunction photocatalyst; pollutant degradation; Introduction Photocatalysis is recognized as an attractive approach for environmental remediation and energy generation applications due to its

• 2D–2D nanocomposites could effectively improve the specific surface area and provide abundant reaction sites to adsorb reactant species on their surface, which can significantly enhance the photocatalytic activity [15][16]. Recently, graphitic carbon nitride (g-C3N4), which is a metal-free polymeric

Mechanistic insights into plasmonic photocatalysts in utilizing visible light

• Kah Hon Leong,
• Azrina Abd Aziz,
• Lan Ching Sim,
• Pichiah Saravanan,
• Min Jang and
• Detlef Bahnemann

Beilstein J. Nanotechnol. 2018, 9, 628–648, doi:10.3762/bjnano.9.59

• . Such materials have already been applied in various environmental and energy conversion applications [36]. Recently, the evolution of a metal-free semiconductor, graphitic carbon nitride (g-C3N4), has been discovered as an alternative for plasmonic photocatalysts. This metal-free semiconductor by

• photocatalytically inert due to their unfavourable band edge position compared to the redox potential of targeted species. An effective approach to overcome this restriction was to integrate the nonstoichiometric materials (tungsten oxide (W18O49)) with graphitic carbon nitride (g-C3N4). The g-C3N4 was used to

Sugarcane juice derived carbon dot–graphitic carbon nitride composites for bisphenol A degradation under sunlight irradiation

• Lan Ching Sim,
• Jing Lin Wong,
• Chen Hong Hak,
• Jun Yan Tai,
• Kah Hon Leong and
• Pichiah Saravanan

Beilstein J. Nanotechnol. 2018, 9, 353–363, doi:10.3762/bjnano.9.35

• Laboratory, Department of Environmental Science and Engineering, Indian Institute of Technology (ISM), Dhanbad 826004, Jharkhand, India 10.3762/bjnano.9.35 Abstract Carbon dots (CDs) and graphitic carbon nitride (g-C3N4) composites (CD/g-C3N4) were successfully synthesized by a hydrothermal method using

Two-dimensional carbon-based nanocomposites for photocatalytic energy generation and environmental remediation applications

• Suneel Kumar,
• Ashish Kumar,
• Ashish Bahuguna,
• Vipul Sharma and
• Venkata Krishnan

Beilstein J. Nanotechnol. 2017, 8, 1571–1600, doi:10.3762/bjnano.8.159

• of the most abundant elements on the earth. In the past two decades, carbon-based materials such as graphene, graphitic carbon nitride (g-C3N4), fullerenes and carbon nanotubes (CNTs) have been explored for various applications such as Li-ion batteries [22], supercapacitors [23], energy storage [24

• structure, while other five phases have indirect band gaps in their bulk structures [62]. It is noteworthy to mention here that the polymeric graphitic carbon nitride (g-C3N4) has been reported as the most stable, highly ordered polymeric structure with pendant amino groups and tri-s-triazine (C6N7) as the

Biomolecule-assisted synthesis of carbon nitride and sulfur-doped carbon nitride heterojunction nanosheets: An efficient heterojunction photocatalyst for photoelectrochemical applications

• Hua Bing Tao,
• Hong Bin Yang,
• Jiazang Chen,
• Jianwei Miao and
• Bin Liu

Beilstein J. Nanotechnol. 2014, 5, 770–777, doi:10.3762/bjnano.5.89

• : graphitic carbon nitride (g-C3N4); heterojunction; photoelectrochemical; photocatalysis; sulfur doping; Introduction Over the past few years, graphitic carbon nitride (CN) has attracted significant research attention in visible-light-driven photocatalysis because of its unique physical and chemical